Blueberry Syrup Canning Recipe

Be the first to rate it!

Blueberry Syrup Canning Recipe

A step-by-step guide to making, water bath, or steam canning Ball Canning's Blueberry Syrup Recipe. This recipe can be found in The Ball Complete Book of Home Preserving.

Prep Time2 20

Cook Time30

Water Bath or Steam Canning Time10

Total Time3

Course: Breakfast

Cuisine: American

Keyword: Blueberry, Canning, Steam Canning, Syrup, Water Bath Canning

Servings: Pint Jars

Equipment

Ingredients

8 cups blueberries crushed
6 cups Water
1 tbsp grated lemon zest
3 cups Granulated Sugar
2 tbsp Bottled Lemon Juice

Instructions

Clean jars and lids with warm soapy water. Ensure the jars do not have any chips or bubbles in the glass.
Wash and sort your blueberries to ensure you have the best blueberries for your syrup.
To crush blueberries, place them one layer at a time (to keep the juice from splattering) in a deep pot. Using a potato masher, or the back of a large spoon, crush the blueberries gently.
Combine the crushed blueberries, 2 cups of water, and lemon zest, in a large stainless steel pot. Bring to a gentle boil over medium heat and boil gently for 5 minutes.
Set a strainer lined with several layers of cheesecloth over a large bowl.
Transfer the blueberry mixture to the strainer. Allow the blueberry juice to drip, undisturbed for at least 2 hours.
Alternate: I have also used a Steam Juicer to juice my crushed blueberries for this recipe. If you have a Steam Juicer this allows you to get nice clear juice with less sediment. Then boil the blueberry juice with the lemon zest to combine flavors. Then strain out the lemon zest and continue with the recipe.
Prepare your canner
Using Water Bath Canner:
Put your water bath canner on your stove. Add your canning rack to the water bath canner. Add your pint jars or quart jars to the water bath canner. They will warm as you heat the water. Add enough water to cover jars with at least 2-3 inches of water. Start to bring your water to a boil.
Using a Steam Canner:
Put your steam canner on your stove. Add the steam canner rack to the bottom of the steam canner. Add the recommended amount of water to the steam canner according to the manufacturer. Add your pint jars or quart jars to the steam canner. Put the lid on your steam canner and start your stove. The jars will warm as you heat your steam canner.
Combine the sugar and the remaining 4 cups of water, in a large stainless steel pot. Bring to a boil over medium-high heat, stirring to dissolve sugar. Cook until the temperature reaches 230℉ (110℃) on a candy thermometer, adjusting for altitude.
Add blueberry juice. Increase the heat to high, bring to a boil, and boil for 5 minutes, stirring occasionally.
Remove from the heat. Stir in bottled lemon juice.
Once you have hot jars and hot syrup
Water Bath Canner:
Remove your jars from the water bath canner one at a time using your jar lifter. Dump the water out of the jar into your water bath canner to ensure there is still 2-3 inches of water above your jars.
Steam Canner:
Remove the steam canner lid and remove your jars one at a time using your jar lifter.
Using the ladle and funnel. Ladle hot syrup into hot jars, leaving 1/4 inch headspace. Use your headspace measurer to verify space. Remove any air bubbles with your de-bubbler and adjust the headspace, if necessary, by adding more syrup.
Wipe the rim to ensure a good seal is made with the lid. Center the lid on the jar and screw the band down to fingertip tight.
Place the jar in the canner using your jar lifter. Repeat until all blueberry syrup is used.
Processing
Water Bath Canner:
Lower the water bath canner rack into the boiling water. Ensure your jars are covered by at least 2 inches of water.
If your water is not boiling start your processing time when the water is boiling. Process pint jars for 10 minutes. Make sure to adjust your time for altitude.
Set a timer, it makes it much easier to make sure you process for the correct time. When your timer goes off turn off the heat and remove the canner lid.
Leave the jars in the water for 5 minutes.
Steam Canner:
Put the lid on the steam canner. Turn your stove on high until your steam canner water comes to a vigorous boil. Continue heating so the indicator is in the correct "Zone" per your altitude.
Start your processing time when the needle reaches the maximum point you have tested your steam canner to reach in your "Zone".
Adjust the burner so that it maintains an even rolling boil throughout the entire processing time. Usually, this will be much lower than where it was set for the vigorous boil. If the top lid is lifting and/or spitting water from the edges this is an indication that you have the heat turned up too high. Slowly reduce the heat until this stops. Watch the indicator to ensure the temperature does not decrease.
The processing times for steam canning are the same as for water bath canning. Process pint jars for 10 minutes.
Make sure to adjust your time for altitude. Set a timer, it makes it much easier to make sure you process for the correct time.
When your timer goes off turn off the heat and let the canner stand for 5 minutes with the lid on before removing the jars. The lid MUST remain ON the canner during this time. This cool-down period is necessary to ensure the jar contents are properly processed.
Carefully remove the lid by tilting it away from you to avoid steam burns.
Using your jar lifer carefully move the jars onto a wire rack or kitchen towel to allow them to cool. When moving the jars try not to tilt them to the side as this could affect the seal of the jars. Allow your jars to cool for 12-24 hours before handling.
Once cool, remove the canning rings from the jars. Wash your jars off to ensure no food residue on the outside of the jar from processing. Label your jar with the name of the recipe and date. This will help you remember what recipe you used to can and the date will allow you to use the oldest canned goods first.

Notes

This recipe can be found in The Ball Complete Book of Home Preserving.